Abstract— achieve certain diagnostic or therapeutic goals was

Electronic medical implants have been emerging in the field of biomedical
engineering in the past few decades. Along with the great inventions came a few
challenges, including infection and inflammation risks, and the costs for the
surgical implant procedure. The idea of edible electronics, or electronic
devices consumed through the digestive system to achieve certain diagnostic or
therapeutic goals was proposed as a solution to these problems. Reliability is
all the more critical because it often turns out to be a case of life or death!

formatting; style; styling; insert

Best services for writing your paper according to Trustpilot

Premium Partner
From $18.00 per page
4,8 / 5
Writers Experience
Recommended Service
From $13.90 per page
4,6 / 5
Writers Experience
From $20.00 per page
4,5 / 5
Writers Experience
* All Partners were chosen among 50+ writing services by our Customer Satisfaction Team

I.      Introduction

Despite so many risks and challenges, it is awesome to
see how implants have developed since the days of the first pacemaker in 1958.
From cardiac pacemakers to cochlear implants, from brain interfaces to retinal
implants, there are numerous implantable medical electronic devices available
today. Even more exciting is the emerging field of edibles—tiny, capsule-sized
electronic devices that are consumed orally for diagnosis and treatment of
diseases. Some edibles are designed to remain inside the body for some time, while
others do their job and get disposed of within minutes.

Today, we have reached a state where inventions like
these no longer surprise us because our minds have become tuned to a sci-fi
future, and we have started expecting such developments. So let us look at the
current and future state of implants and edibles.

II.    Today’s extends
of edible electronic drugs

improvements in quality and reliability, there is now a reasonably good demand
for cochlear, retinal and cardiovascular implants. Cardiovascular implants have
evolved much in recent years, and have overcome past constraints regarding
compatibility with imaging systems such as magnetic resonance imaging (MRI).
Interestingly, the rise in lifestyle diseases like diabetes has also led to an
increased demand for implantable devices like implantable continuous glucose
monitoring and implantable infusion pumps. There are also implantable devices
for phrenic nerve stimulation to restore breathing function in patients, and
sacral nerve stimulation for patients with bladder disorders. Implantable
neuro-stimulators, on the other hand, help those with neurological disorders
like Parkinson’s disease.

Fig. 1.   
NASA ingestible Thermometer Pill

  With the availability of better biocompatible
materials that minimize the possibility of infections, there is greater faith
in implants. Researchers at the Graeme Clark Institute have developed an
implant that is fitted under the scalp to diagnose and treat epilepsy and even
forecast a likely seizure. They are also developing an implantable drug pump
for patients with drug-resistant epilepsy.

implants are used when hearing aids don’t work well—that is, when the patient
has severe sensorineural hearing loss due to absent or reduced cochlear hair
cell function. The implant basically carries out the function of the cochlea or
inner ear, stimulating the auditory nerve directly.

implants are giving vision to the impaired around the world. Going one step
further, the Monash Vision Group is developing Gennaris—a bionic vision system
that bypasses damage to the eye and optic nerve to restore functional vision
for people who have injured both these or lost sight due to glaucoma and
acquired the retinal disease. This system interfaces directly with the brain,
bypassing the retina and optic nerve.

researchers are also exploring biocompatible, implantable photonic devices that
can improve health monitoring, diagnostics and light-activated therapies.
Consider the possibility of biocompatible and wirelessly powered light-emitting
diodes (LEDs) and miniature lasers implanted inside the body. Advances in
biotechnology, such as optogenetics, will enable these photonic implants to be
integrated tightly with neurological or physiological circuits.

  A good interface
between implanted devices and the brain can help in great ways—for example, it
can return motor function to amputees and people paralysed due to stroke or
spinal cord injury. A minimally invasive electrode called the Stentrode
developed at the University of Melbourne might be a step in this direction.
Implanted into a blood vessel adjoining the area of the brain that controls
movement, it may help control an exoskeleton, enabling crippled or paralysed
people to move. The implant can apparently be installed without opening the
skull, which is what makes it attractive!

  Neuralink, a
company funded by Elon Musk, is also working on implantable brain-computer
interfaces. They are developing syringe-injectable, flexible, sub-micron-thickness
substrates that can be used in implantable electronics. The substrate is soft
enough to sit harmlessly in the brain, and has electrical properties that
enable only the targeted part of the brain to receive the electrical stimulus.

interface is the future of implantable systems. It can help people with
degenerative brain diseases and neurological disorders. However, it must be
handled with care because an electrode implanted in the brain can be used both
for good and bad purposes!

III.   Edibles for diagnostics and their manufacturers


the electronic device needs to stay inside the body forever or for a reasonably
long time, it is worth operating on a patient to implant the device. However,
if you just want it to stay inside for a few minutes, hours or even days, for
the purpose of monitoring a health condition or temporarily dispensing some
medicines, operating on the patient doesn’t make sense. This requirement led to
the development of ingestible or edible electronics, which industry-watchers expect to create
huge impact like wearable did.

 The electronics
that you swallow, encapsulated in a pill, will sit in your gastrointestinal
tract for a short time, before being ejected from your body like regular food
waste. During this time it can capture videos, release drugs, monitor heart
rate and respiration, and perform other such tasks.

 Proteus Digital
Health was one of the pioneers in ingestible tech, and their technology is now
used commercially by close to ten health systems. Their solution comprises a
pill, a patch that is attached outside to the side of the stomach, and a mobile
app/desktop portal. The pill is made of whatever drugs are required, and fitted
with a sensor made of natural, ingestible materials like copper, magnesium and
silicon. When a patient swallows the pill, it dissolves like a normal pill in
the stomach but leaves behind a sensor, which is activated by fluids in the
body. This sensor sends a signal to the patch, which also measures heart rate,
body position and time of medication detection. This information is sent to the
patient’s or doctor’s mobile phone.

Fig. 2.   
FDA approves edible electronic pills sense when you take your

  Regular drug
intake is very important for those undergoing complex medical treatments such
as organ transplants. This pill could be very useful for such patients. Proteus
has teamed up with Tokyo-based firm Otsuka to embed Proteus’ sensors into
Abilify—a drug used for serious mental illnesses.

forerunner in the space is Israel-based Given Imaging. Their PillCam series
comprises pills with ingestible cameras, which can help doctors to view
different parts of the patient’s digestive system like the oesophagus or colon.
It is a painless alternative to tests like endoscopy and colonoscopy. The PillCam
Colon, for instance, uses a battery-powered camera to take high-speed photos as
it slowly goes down the intestinal tract over a time period of eight hours. The
images are transmitted to a recording device worn around the patient’s waist
and later reviewed by a doctor. Although the images are not as sharp as those
obtained through normal colonoscopy, it is a viable alternative for those who
cannot bear the pain or feel embarrassed by the procedure.

  Other versions
of PillCam help doctors to see the small intestine and oesophagus. The company
has also developed SmartPill— an ingestible capsule that measures pressure, pH
and temperature as it travels through the gastrointestinal tract. This helps
doctors to assess GI motility.

  Bravo pH is
another capsule-based test that helps to test for acid reflux. The miniature pH
capsule attaches to the oesophagus and sends pH data wirelessly to a small
recorder worn on a shoulder strap or waistband. Information is collected
over multiple days, enabling doctors to study the frequency and duration of
acid flowing back up into the oesophagus. This helps to confirm the presence of
gastroesophageal reflux disease (GERD). This is a totally catheter-free
solution, so the patients can go about normal activities and have a normal diet
while the pill unobtrusively monitors their acid reflux. They can remove the
receiver to take a shower. This type of monitoring under a normal routine gives
better results than keeping the patient under observation.

IV.   Challenges in this technology

most obvious challenge to edible electronics is, obviously, miniaturization. It
is impossible to implant or consume something that is bulky. With the
electronics industry in general moving towards miniaturization in everything,
this goal has become more achievable in implantable devices, too. Unlike the
traditional pacemaker, the newer leadless pacemakers are about the size of a
large capsule, and can be placed directly in the heart. These can be implanted
through a femoral vein puncture in about half an hour. No more bulges or scars,
these pacemakers are very not conspicuous and apparently also less prone
to infections. The National Heart Centre Singapore (NHCS) began implanting such
pacemakers last year.

management is another huge challenge in implantable devices. Like any other
electronic device, implantable devices too vent out waste heat. However, this
heat should not harm the surrounding tissues. So while designing an implantable
device, engineers have to consider thermal properties of biomaterials, the
effect of blood flow on temperature distribution, interfacial contact
resistance, effect of temperature change on various types of tissues and
communication duty cycles of embedded electronic components.

  Further, the
in-vivo electronic device must be biocompatible—it must not cause any adverse
reaction inside the body. It must be stable over time, despite the temperature
and pH variations in the human body. The biocompatible materials must not
contain cancer causing toxins, and must mostly be made of materials naturally
suitable to the human body. The insulation materials must match the texture and
smoothness of the surface they interface with, be it tissue, bone or skin.

  Currently, we
have biocompatible polymers for use in drug delivery devices, skin or cartilage
and ocular implants; metals for dental and orthopaedic work; semiconductor
materials for bio-sensors and implantable microelectrodes; and ceramics for
bone replacements, heart valves and dental implants. But, ingestible electronics
adds to the constraints, requiring the device and its power source to be made
of materials that are part of our diet and can be disintegrated and disposed of
easily by the body. The search is on there is a lot of ongoing research on
bio-inspired, biocompatible materials and power sources, which can improve the
performance and reliability of implantable and ingestible devices. A recent
paper by MIT researchers, published in Nature, describes a biocompatible power
source that lasts much longer than current options that can power the edible
device only for a few minutes or at the most a few hours. This
energy-harvesting galvanic cell for continuous in-vivo temperature sensing and wireless
communication could deliver an average power of 0.23pWper square-mm of electrode
area for an average of 6.1 days, when used for temperature measurements in the
gastrointestinal tract of pigs.

  In yet another
development, Dr. Christopher Bettinger of Carnegie- Mellon University proposed
biodegradable elastomers as structural polymers, and melanin- based pigments as
materials for on-board energy storage in implantable and ingestible
electronics. His lab focuses on the development of biomaterials-based micro electro
mechanical systems (MEMS) for use in regenerative medicine, neural interfaces,
drug delivery, etc. They have developed edible, biocompatible batteries that
use non-toxic materials already present in the body, with available liquids
such as stomach acid as the electrolyte. Their cathodes use melanin, while
anodes are made of manganese oxide. These electrodes dissolve harmlessly after

  A team of
researchers, including Zhaowei Guo and others from Fudan University in China,
have developed a family of flexible and biocompatible aqueous sodium-ion
batteries for implants. Instead of toxic electrolytes, these batteries use
sodium-containing aqueous electrolytes such as normal saline and cell-culture
medium. The cell culture medium comprises amino acids, sugars and vitamins,
which is quite similar to the fluid that surrounds cells in the human body.

  The team made
two kinds of batteries. One was a two-dimensional belt-shaped battery made of
thin films of electrode material stuck on a mesh made of steel strands. The
other used a woven carbon nanotube fibre backbone with embedded nano-particle
electrode materials.

fibre-shaped electrode with normal saline or cell-culture medium electrolyte
surprised the researchers by accelerating the conversion of dissolved oxygen
into hydroxide ions, and changing the pH. While this could be detrimental to
the effectiveness of the battery, it could be very useful in biological and
medical investigations like cancer starvation therapy.

  In Stanford, a
team led by Zhenan Bao has developed a flexible electronic device that can
easily be degraded into non-toxic compounds just by adding a weak acid like
vinegar to it. Apart from the polymer and these gradable electronic circuit,
the team has also developed a new cellulose-based biodegradable substrate
material for mounting the electrical components. According to them, this
substrate supports electrical components, flexing and molding to rough and
smooth surfaces alike.

  Bao is not new
to this field. She previously developed a skin-inspired stretchable electrode,
which was so flexible that it could easily interface with the skin or brain.
However, the electrode’s non-degradability made it unsuitable for implantable

  Bao says in a
media report that they came up with an idea of making these molecules using a
special type of chemical linkage that can retain the ability for the electron
to smoothly transport along the molecule. But this chemical bond is sensitive
to weak acid— even weaker than pure vinegar. So the result was a polymer
material that could not only carry an electronic signal but also break down
easily to product concentrations much lower than the published acceptable
levels found in drinking water.1

Fig. 3.   
An all-food supercapacitor

team of researchers from the University of Wollongong in Australia, in a paper,
they reveal that the development of highly swollen, strong, conductive hydrogel
materials is necessary for the advancement of edible devices. So they analyzed
the electrical properties of everyday food products like jelly, Vegemite and
Marmite (two popular brands of yeast extract) and harnessed them to make edible
hydrogel electrodes. These gels were used to demonstrate a capacitive pressure
sensor that can help detect digestive pressure abnormalities such as intestinal
motility disorders.

V.    Digestible electronic with indigestible cost

  A recent Frost
& Sullivan report noted that the fastest growing segment amongst the many
types of implants is implantable neuro stimuIators, which help treat
neurological disorders such as epilepsy, dementia, Alzheimer’s disease,
Parkinson’s disease and dystonia. It is also likely that in the future, these
implantable electronics will be digitally connected to improve the scope of
remote drug delivery, testing and diagnostics.

  The cost of
researching and developing implants continues to be high due to the criticality
and complications involved—and often this cost reflects in the end price
points. In the report, Frost & Sullivan industry analyst Bhargav Rajan
noted that the constant stream of innovations has attracted substantial private
funding to the implantable electronics market, while public funding is
expected to improve in the future. He also suggested that technology developers
can lower development costs by collaborating with early-stage start-ups and
small- and medium-sized enterprises. This will allow them access to cross-
industry expertise and cutting-edge innovations, which, in turn, will help
lower the price points.

  A majority of
the population seeking implants belongs to low- and middle-income groups.
Taking note of this factor, the report also stressed that the growth of this
sector depends not entirely on technological development but also the
availability of insurance coverage and reimbursements for such devices.



Alex Keller,  Jonathan Pham,
Holly Warren and  Marc in het Panhuis, “conducting
hydrogels for edible electrodes,” Journals for materials chemistry,2017. 

 Paul Frenger, “Edible Organic Semiconductors,”
978-1-4673-0967-7/12/$31.00 ©2012 IEEE

 H. Koezuka, A. Tsumura, T. Ando, “Field-effect
transistor with polythiophene thin film”. Synthetic Metals, 18 (1987), pg.

“Organic Field-Effect
Transistor”. Available: http://en.wikipedia.org/wiki/Organic_field-effect_transistor.

 ”Melanin”. Available: http://en.wikipedia.org/wiki/Melanin.

Loscri V and Vegni AM,” An
acoustic communication technique of nanorobot swarms for nanomedicine applications,”
IEEE Trans Nanobioscience 2015,14:598-607.

Y. Belaroussi, A. Slimane, M.
T. Belaroussi, M. Trabelsi, G. Scheen, K. Ben Ali, J.-P. Raskin, “RF and
nonliniarity characterization of porous silicon layer for RF-ICs”, Proceedings
of 9th IEEE International Design & Test Symposium – IDT’2014, pp. 79-82.

 L.-K. Yeh, C.-Y. Chen and H.-R. Chuang, “A
Millimeter-Wave CPW CMOS On-Chip Bandpass Filter Using Conductor-Backed
Resonators”, IEEE Electron Device Letters, 2010, 31 (5), pp. 399-401.

P. R. Nair and M. A. Alam.
Design Considerations of Silicon Nanowire Biosensors. IEEE Trans. Electron
Devices, 2007, 54, 3400-3408.

N. Das and C. RoyChaudhuri.
Reliability Study of Nanoporous Silicon Oxide Impedance Biosensor for Virus
Detection: Influence of Surface Roughness. IEEE Trans. Device and Materials
Reliability, 2015, 15,402-209.

 R. Mannerbro , M. Ranlöf, N. Robinson, R.
Forchheimer, “Inkjet printed electrochemical organic electronics”. Synthetic
Metals, 158:13 (2008), pg. 556-560.